Polytek Pol-Ease 2500 Release Agent (Case of 12 cans)


Polytek Pol-Ease 2500 Release Agent (Case of 12 cans) by Polytek at Accelerated Artist. MPN: Pol-Ease 2500. Hurry! Limited time offer. Offer valid only while supplies last. Molds will not last as long as they would if Pol-Ease 2300 Release Agent was used. The main reason for using Pol-Ease 2500 in a polyurethane mold would be to cast a part that can be cleaned more easily than a part covered with Pol-Ease 2300. This is beneficial when painting cast parts. After spraying, brush out this release agent with a soft brush to help improve results. No drying time necessary.Can be washed off models and castings if they need to be painted. For Mold Making: Apply to non-poro


Polytek Pol-Ease 2500 Release Agent (Case of 12 cans) by Polytek
4.6 out of 5 stars with 15 reviews
Condition: New
Availability: In Stock
$124.99


Quantity:  

 


Product Description & Reviews

Molds will not last as long as they would if Pol-Ease 2300 Release Agent was used. The main reason for using Pol-Ease 2500 in a polyurethane mold would be to cast a part that can be cleaned more easily than a part covered with Pol-Ease 2300. This is beneficial when painting cast parts. After spraying, brush out this release agent with a soft brush to help improve results. No drying time necessary.

Features & Highlights

  • Can be washed off models and castings if they need to be painted
  • For Mold Making: Apply to non-porous or sealed models when making silicone rubber molds (not recommended for use with liquid polyurethane rubbers).
  • Apply to silicone rubber molds when casting liquid silicone rubber
  • To extend mold life, apply to silicone molds when casting materials such as polyurethane plastics, rubbers or epoxies (release agent is not needed for this process, but can extend mold life)
  • Apply to polyurethane molds before casting polyurethane liquid plastics

Additional Information

Brand:
Polytek
Manufacturer:
Polytek
Category:
Release Agents
Model:
4336900297
MPN:
Pol-Ease 2500
UPC:
686603383742
Part Number:
Pol-Ease 2500
Publisher:
Polytek
Binding:
Office Product

 


Have questions about this item (Pol-Ease 2500), or would like to inquire about a custom or bulk order?


If you have any questions about this product by Polytek, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


mpn: Pol-Ease 2601, ean: 0686603383872,
NOTES: As with other releases containing silicone, castings may need to be washed before applying finishes. Because this release agent is water-based, it does not affect the dimensions of cured rubber molds as much as releases that contain solvents. ...

mpn: Pol-Ease 2650, ean: 0686603383896,
NOTE: Shake or stir before use.Silicone-free release agent. For casting concrete or plaster into polyurethane rubber molds. Brush or spray as light of a coating as possible into the mold. No drying time is needed- castings can be done immediately.

mpn: PolyCoat, ean: 0686603383858,
PolyCoat can be used in both mold making and casting applications.Low-viscostity. Semi-permanent. Sealer. Release Agent. Leaves behind a thin coating of silicone.

This is a Case of (12) Cans. Great Price for Shop Supplies! PARTALL Hi-Temp Wax is a premium multi-release mold release agent formulated from a blend of hydrocarbon and microcrystal-line waxes and fortified with PTFE polymer. It is particularly reco...