Polytek Pol-Ease 2601 Release Agent (40lb)


Polytek Pol-Ease 2601 Release Agent (40lb) by Polytek at Accelerated Artist. MPN: Pol-Ease 2601. Hurry! Limited time offer. Offer valid only while supplies last. NOTES: As with other releases containing silicone, castings may need to be washed before applying finishes. Because this release agent is water-based, it does not affect the dimensions of cured rubber molds as much as releases that contain solvents. This water-based release agent will freeze in cold temperatures and become unusable. Always store and use at room temperature. Shake or stir before use.Water-based silicone emulsion. Can be brushed or sprayed into a polyurethane mold before casting c


Polytek Pol-Ease 2601 Release Agent (40lb) by Polytek
4.5 out of 5 stars with 15 reviews
Condition: New
Availability: In Stock
$115.99


Quantity:  

 


Product Description & Reviews

NOTES: As with other releases containing silicone, castings may need to be washed before applying finishes. Because this release agent is water-based, it does not affect the dimensions of cured rubber molds as much as releases that contain solvents. This water-based release agent will freeze in cold temperatures and become unusable. Always store and use at room temperature. Shake or stir before use.

Features & Highlights

  • Water-based silicone emulsion
  • Can be brushed or sprayed into a polyurethane mold before casting concrete or plaster
  • Works best when allowed to dry
  • Use a thin application

Additional Information

Brand:
Polytek
Manufacturer:
Polytek
Category:
Release Agents
MPN:
Pol-Ease 2601
UPC:
686603383872
Part Number:
Pol-Ease 2601
Publisher:
Polytek
Binding:
Office Product

 


Have questions about this item (Pol-Ease 2601), or would like to inquire about a custom or bulk order?


If you have any questions about this product by Polytek, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


mpn: Pol-Ease 2650, ean: 0686603383896,
NOTE: Shake or stir before use.Silicone-free release agent. For casting concrete or plaster into polyurethane rubber molds. Brush or spray as light of a coating as possible into the mold. No drying time is needed- castings can be done immediately.

mpn: PolyCoat, ean: 0686603383858,
PolyCoat can be used in both mold making and casting applications.Low-viscostity. Semi-permanent. Sealer. Release Agent. Leaves behind a thin coating of silicone.

This is a Case of (12) Cans. Great Price for Shop Supplies! PARTALL Hi-Temp Wax is a premium multi-release mold release agent formulated from a blend of hydrocarbon and microcrystal-line waxes and fortified with PTFE polymer. It is particularly reco...

This is a Case of (12) Aerosol Cans. Great Price for Shop Supplies! Stoner E302 Rocket Release is a versatile Non-Silicone based release agent. Rocket Release allows molded parts to be painted, plated, hotstamped, adhesive bonded, labeled, or otherwi...